Grenton MUL-211-D-01 Input/Output Module (1-Wire, DIN rail)

The Grenton MUL-211-D-01 analog input and output module expands the system's capabilities to support 0-10 V, 0-5 V, 0-20 mA standards and the 1-Wire bus. The device is powered from the TF-Bus connector and designed for mounting on a standard DIN rail in a switchgear.

The Grenton Analog IN/OUT module is a device that allows the system to be integrated with various analog sensors and receivers. The module is equipped with four 0-10 V outputs, four 0-10 V inputs, and two additional 0-5 V inputs. Furthermore, the device has two channels for the 1-Wire bus, allowing a total of up to 16 sensors to be connected. Configuration of input and output parameters is done via dedicated methods and system events.

Key features

• Support for 0-10 V, 0-5 V, and 0-20 mA signal standards.
• Support for the 1-Wire bus with up to 16 sensors on WA and WB channels.
• Ability to switch IN1 and IN2 inputs to 0-20 mA current mode using hardware jumpers.
• Direct power supply from the TF-Bus with 24 V DC voltage.
• Compact housing occupying 4 modules on a standard DIN rail.

Technical data

Bus power supply	24 V DC
Maximum power consumption	0.48 W
Maximum current consumption	20 mA
Input voltage IN1-4	Maximum 10 V DC
Input voltage IN5-6	Maximum 5 V DC
Output voltage OUT1-4	Maximum 10 V DC
Maximum output current for OUT1-4	10 mA
Maximum connection wire cross-section	1.5 mm²
Dimensions (H / W / D)	58 / 71 / 90 mm
DIN size	4
Operating temperature range	0 to +45 °C