Teletask TDS13526 AC Motor Control Module (4x 350 W)

The Teletask TDS13526 module enables independent control of four AC motors with a voltage of up to 265 V and a maximum power of 350 W per channel. This DIN rail-mounted device communicates via the AUTOBUS and provides real-time drive position information.

The Teletask TDS13526 device is an output interface designed to control roller shutters, blinds, and awnings with AC motors. The module features motor operation detection, enabling automatic runtime correction and determination of its end position. Thanks to built-in relays that switch to a low-power mode after changing position, the interface effectively optimizes energy consumption in the system. Device configuration is carried out using dedicated PROSOFT software, while hardware addressing on the network is handled by two built-in rotary switches.

Key features

• Independent control of up to four AC motors with a power of up to 350 W each.
• Visualization of the current drive position in percentages on the graphical user interfaces.
• Automatic runtime correction thanks to integrated motor movement detection.
• Full backward compatibility as a direct replacement for the TDS13524 model.
• Hardware LED indication of bus operation status and power supply for individual drives.

Technical data

Motor input supply voltage	100-265 VAC
Maximum input current	6 A
Maximum load per channel	350 W
Module power supply (from bus)	12 V (min. 9 V)
Power consumption from AUTOBUS	max. 140 mA
Maximum wire cross-section (solid)	4 mm²
Maximum wire cross-section (stranded)	2.5 mm²
Mounting width	6 DIN modules
Protection degree	IP20
Operating temperature	from 0°C to +50°C
Dimensions	108 x 90 x 60 mm
Net weight	0.235 kg