Emiter UTP5EPVC-STD. UTP Cable (Cat. 5e, solid wire)

The Emiter Cat. 5e U/UTP ICT cable is designed for building data transmission networks in the Gigabit Ethernet standard. The cable features pure copper conductors with PE insulation and a PVC outer jacket with an Eca reaction to fire class.

The unshielded Cat. 5e U/UTP cable by Emiter is used to build ICT infrastructure. The design is based on 4 pairs of twisted solid copper wires, which reduces near-end crosstalk. The outer jacket is made of gray PVC, and the transmission parameters of the cable have been tested up to a frequency of 350 MHz.

Key features

• Unshielded 4-pair twisted cable (U/UTP) Cat. 5e.
• Solid copper conductors with a diameter of 0.5 mm.
• Outer jacket made of PVC in gray.
• Reaction to fire class Eca according to the PN-EN50575 standard.
• Tested for operation at frequencies up to 350 MHz.

Technical data

Category	5e
Shielding type	U/UTP
Outer cable diameter	4.7 mm ± 0.5 mm
Single conductor diameter	0.5 mm ± 0.05 mm
Outer jacket	PVC (gray)
Conductor insulation	PE
Conductor material	copper (solid wire)
Characteristic impedance	100 Ω ± 15 Ω (1–100 MHz)
DC resistance	97.5 Ω/km
NVP	69%
Insulation resistance (min.)	150 MΩ/km
Mutual capacitance	1.6 nF/km
Minimum bending radius (installation)	40 mm
Minimum bending radius (operation)	20 mm
Operating temperature	from -20 °C to +70 °C
Installation temperature	from 0 °C to +50 °C